Overtons Watersports® > Launching Life on the Water Since 1976®

Your Overtons.com Session is About to Expire!

What Would You Like To Do?

Renew My Session
Log Out
Save Up To $50 On Your Order - Promo Code: JULY50

Michigan Wheel 3-Blade Prop, Pressed Rubber Hub / Aluminum, 13.5 dia x 15, RH

Item # 27094
Customer Rating:

Key Features

  • Propeller with trouble-free service

  • Stronger than most OEM props

  • Rubber hub

  • Protects shafts, motors, and gear boxes


Our Price   $134.99

Availability: In Stock

Please make sure all selections are complete and a valid quantity is entered and try again.

details

back to top
Product Description
michigan_wheel Michigan Wheel propellers are designed for trouble-free service and easy repairability. By using only the finest grade alloys, Michigan Wheel aluminum propellers are stronger than most OEM propellers. The rubber hub bonded inside every Michigan Wheel propeller helps protect expensive shafts, motors, and gear boxes from potential damage caused by underwater impact.

Vendor Part Number: 011102

Applications:
Evinrude/Johnson: 40-75 HP, 4-1/4" Gearcase, Thru Hub Exhaust, 13 Tooth Spline, 40 HP E-TEC, 2004 & Newer; 45 HP 2 Cyl. (Commercial), 1986-1995; 50 HP E-TEC, 2004 & Newer; 50 HP 2 Cyl. (Commercial), 1977-1979; 50 HP 2 Cyl. (Pleasure), 1971-1974; 50 HP 3 Cyl. (Pleasure), 1994-1998; 55 HP 3 Cyl., 1968-1969; 55 HP 2 Cyl. (Commercial), 1980 & Newer; 55 HP E-TEC, 2009 & Newer; 60 HP 3 Cyl. (Pleasure), 1970-1971 & 1986-2001; 60 HP E-TEC, 2004 & Newer; 60 HP 4-Stroke, 1998 & Newer; 65 HP 3 Cyl. (Pleasure), 1972-1973; 65 HP 3 Cyl. (Commercial), 1984-2001; 65 HP (Pontoon Series), 2014 & Newer; 70 HP 3 Cyl. (Pleasure), 1974 & Newer; 70 HP 3 Cyl. (Commercial), 1974-2001; 70 HP 4-Stroke, 1998 & Newer; 75 HP 3 Cyl. (Pleasure), 1975-1984; 75 HP E-TEC, 2004 & Newer; 85-140 HP, 4-1/4" Gearcase, Thru Hub Exhaust, 13 Tooth Spline, 85 HP, 1969-1980 & 1991-1995; 88 HP, 1981-1996; 90 HP, 1981 & Newer; 90 HP E-TEC (20" Shaft), 2004 & Newer; 100 HP, 1979-1980 & 1986-1993; 110 HP, 1986-1989; 112 HP, 1994-1996; 115 HP, 1973 & Newer; 115 HP E-TEC (20" Shaft), 2004 & Newer; 120 HP, 1986-1994; 125 HP, 1971-1972; 130 HP E-TEC (20" Shaft), 2004-2010; 135 HP, 1973-1976; 140 HP, 1977-1994

OMC: Model 400, Cobra, 4-1/4" Gearcase, Thru Hub Exhaust, 13 Tooth Spline, Model 400 2.3L (120 HP), Thru 1991; Model 400 2.5L (120 HP), 1978-1984; Model 400 3.0L (140 HP), Thru 1989; Cobra 2.3L (128 HP), 1988-1991; Cobra 2.5L (120 HP), 1985-1987; Cobra 3.0L (140 HP), 1985-1987

product reviews

back to top

REVIEW SNAPSHOT®

by PowerReviews
Michigan Wheel 3-Blade Prop Pressed Rubber Hub / Aluminum 13.5 dia x 15 pitch RH
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

 
4.0

8 easy steps

By Remnar

from Chicago, IL

About Me Casual/ Recreational

Verified Reviewer

Pros

  • Easy to Use
  • Shiny black

Cons

  • None Yet

Best Uses

  • Engine

Comments about Michigan Wheel 3-Blade Prop Pressed Rubber Hub / Aluminum 13.5 dia x 15 pitch RH:

Tools required:
1 1/16" wrench (floating yellow nylon version purchased here
Pliers
Waterproof grease
Screwdriver

Removed cotter pin with pliers, removed nut with wrench. Removed washer. Greased shaft. Drank screwdriver. Reversed steps 1-3. Prop fit well on shaft. Very little play but slid right on. Total install was under 10 minutes which meant waiting until the screwdriver wore off to test it.

Performace? Better hole shot. More RPMS than 17" pitch so same top speed.

Overall: I liked it enough that I'm buying another Michigan Wheel prop, a 13.75x13" pitch for tubing, skiing, and large parties.

  • Was this a gift?:
  • No

Displaying review 1

Back to top

q & a

back to top