You May Also Like
back to top- GET MORE INFO
- details & specs
- |
- accessories
- |
- videos
- |
- reviews
- |
- Q & A
- |
- manuals
details & specs
back to top|
Product Description
Specifically designed for sport and leisure watercraft, MariDeck is an exterior grade vinyl deck covering. High-tech polymer formulation repels water and moisture, preventing deck rot, while embossed surface texture provides slip-resistance. Designed with UV stabilizers, the deck covering will resist fading and endure long-term use. MariDeck vinyl is shipped directly from the manufacturer within 1-2 days from the time you place your order and takes approximately 5-10 business days for delivery.These items are non-returnable and non-refundable. Sold by the running foot. For example, an order quantity of 20 will be a 6'W X 20'L roll. 15' minimum order. Please order item #35337 for a free sample swatch card. |
videos
back to topmanuals
back to topproduct reviews
back to topReviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
- Attractive Design
- Water Resistant
Cons
- Can be hard to instal
Best Uses
- Large Boats
Comments about Deck Rite MariDeck Vinyl Floor Covering, - 6' Wide:
So far so good. Seems like a straight up flat boat deck is the best place to instal this. I have some contours at the chine area of the boat that made getting the floor cut and installed a little tricky. I made a pattern out of shipping paper and cut the vinyl after transfering the pattern to the vinyl. Water prrof so far, have something to wipe up the water. It runs over the top of this. And ... in direct sun light this stuff is HOT. Needed to wear flip flops until the Bimini was up to shade the floor.
- Was this a gift?:
- No
Pros
- Attractive Design
- Easy To Clean
- Easy To Install
- Water Resistant
Cons
Best Uses
Comments about Deck Rite MariDeck Vinyl Floor Covering, - 6' Wide:
Replaced carpet in my 21ft Celebrity Firestar. So much less work than carpet. It is textured and will hold dirt if left out in elements or just don't care what u drop on it but cleans up like new with a scrub brush and a little elbow grease or just break out pressure washer. Very durable. Since it doesn't retain water boat dries out so much faster which means less mold and mildew. Everyone loves it and thinks its carpet at first glance.
Pros
- Attractive Design
- Easy To Clean
- Easy To Install
- Very Impressed
- Water Resistant
Cons
Best Uses
- Small Boats
Comments about Deck Rite MariDeck Vinyl Floor Covering, - 6' Wide:
We were skeptical replacing our carpet but we were also tired of trying to keep the carpet clean and looking good. The MariDeck product has been wonderful. Easy to install and maintain. We love it!
Pros
Cons
- Hard To Clean
Best Uses
- No use
Comments about Deck Rite MariDeck Vinyl Floor Covering, - 6' Wide:
This flooring is installed on our new (Now 1 year old)pontoon boat. I thought a vinyl floor was such a good idea but it is beige and looks terrible even after our attempts to clean it. Dirt, mold, and every thing that falls from the trees collects in the "embossed texture". I strongly recommend against it and am now looking to see if I can get carpet to put over it.
Displaying reviews 1-4
q & a
back to topDo you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:
Will it lay down flat if you want to just lay it down over carpet with out attaching it, I just want to protect the carpet in my fishing boat with out removing the carpetAsked on 4/13/2012 by Anonymous from MN.0 answers
Q:
How do you finish off the folds on corners of hatches on aluminium boats, do you hot air weld or glue them?
Chris
AustraliaAsked on 8/22/2011 by Porky from Australia0 answers
Q:
Is this price of 12.99 per ft I have a 33ft boat. The bow has
a area of about 10'x12' and about 20" along both sides of the
cabin and about 24" across the stern. So how would I have to
order this? I would have alot of splices. Or there would be so
much waste. The boat is 12'x33' total. How do you seal the seams? is there some sort of strip to put over the seams so
they wont leak? Please let me know I would like to order your
product Thank You.Asked on 7/17/2009 by Larry G from Wausau WI.1 answer
CUSTOMER CARE
A:
Sold by the running foot. For example, an order quantity of 20 will be a 6'W X 20'L roll. 15' minimum order. Seaming this material is very difficult and is done by the manufacturer on custom widths by a dielectric weld. Contact cement could be used, but over time, will begin to curl. Typically, people will hot air weld a PVC material like this together. We can special order a specific width/length directly from the manufacturer if you would like. If you have any further questions, please feel free to contact our tech department at 1-800-334-6541Answered on 7/21/2009 by Ryan from Overtons
Q:
Can this product be install on a cement deck?
Can it be seemed on site by an experienced do-it-yourselfer?Asked on 7/11/2009 by Anonymous from Frederick, MD1 answer
CUSTOMER CARE
A:
This product goes down with glue and there is no glue that sticks to concrete. This is strictly for wood, metal, or fiberglass applications.Answered on 1/25/2010 by Justin from Overton's
Q:
How easy is it to install? We have a pool with vinyl covered plywood and the vinyl is now cracking (after 15 years). Would we need to pull up the existing vinyl or sand down to the plywood (i.e., remove residual adhesive from existing vinyl)?Asked on 6/30/2009 by Greg from Granby, CT1 answer
CUSTOMER CARE
A:
Installation is pretty easy once the prep work is done. It is recommended to remove the existing vinyl as well as the old adhesive to insure that the new adhesive and vinyl flooring adheres properly.Answered on 7/6/2009 by Ryan from Overtons
Q:
Is the 12.99 the cost per linear foot or square yard..Asked on 5/7/2009 by Anonymous1 answer
CUSTOMER CARE
A:
This item is sold by the running foot with a 15' minimum order requirement. This info is now located under the Additional Details portion of our new site.Answered on 5/26/2009 by Ryan from Overtons
Q:
how do you apply this floor covering to the surface of the boat?Asked on 4/27/2009 by guano2 answers
CUSTOMER CARE
A:
You will need to use an adhesive to attach it to the floor. For wood surfaces you would use 33957. For metal/fiberglass surfaces you will need to use 33959.Answered on 4/28/2009 by Matt from Gander TechCUSTOMER CARE
A:
You would need to apply with an adhesive.Answered on 4/28/2009 by Spencer from Gander Mtn
Q:
How do you measure for installation of this productAsked on 2/2/2009 by Greg from Hattiesburg, Ms1 answer
CUSTOMER CARE
A:
You would basically just need to measure the area you need the vinyl. Just keep in mind this item is only coming in 6' increments.Answered on 2/9/2009 by Spencer from Gander Mtn

