Maretron NMEA 2000 Network Micro Termination Resistor - Inline
Meets NMEA 2000 specifications
Termination resistors are required to end a trunk
Screw connectors help to prevent disconnect
Inline terminator ends line at a device
Availability: Sold Out
- Please note: This item can only be shipped to U.S. addresses.
details & specsback to top
Product DescriptionTwo termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Screw connectors provide a positive connection. Termination resistors are waterproof and continue to function even while submerged in the bilge. An inline terminator is used when the network is terminated at a product, for example, a GPS or weather station at the top of a mast. Inline terminators have one female end and one male end. Some Mini Termination Resistors have LED indicators for polarity to ensure that power connections have been made properly. Meets NMEA 2000 specifications.
Maretron NMEA 2000 Cables and Connectors
The NMEA 2000 standard defines requirements for cables and connectors making up the physical interface. These Maretron cables and connectors are NMEA 2000 approved for building an operational NMEA 2000 network. There are three types of NMEA 2000 cabling systems: Micro, Mid, and Mini. The Micro/Mid cable system is generally used for smaller networks requiring less power (i.e. less than 4 amps per network leg), while the Mini cable system is used for larger networks (i.e. between 4 and 8 amps per leg).
Maretron NMEA 2000 Cable and Connector Features:
• Trunk and drop line topology, allowing you to remove or reconnect a powered component, while the rest of the network remains operational
• Cable includes power and ground for powering equipment drawing less than 1 amp/device
• Connectors include keys and keyways for simple error-free connections
• Screw thread connectors reduce chances of accidental disconnects
• Waterproof system prevents corroded intermittent connections and remains functional when submerged in the bilge
• Three independent cable shields-power pair, signal pair, and overall cable-protect system from external noise (i.e. high power radio transmitters and radar units)
• Nickel-plated brass connector ends
• Phosphor bronze contact base material with gold over nickel plate offers reliable connections
• Overmolded cable connector ends provide strain relief
• Diagnostic components enable trained and untrained personnel to diagnose and troubleshoot network installations