Enter or verify that code SUMMER50 is in your cart at checkout, and a $15 discount will be applied to your order over $100, and a $50 discount will be applied to your order over $250. Your savings will be based on the merchandise total only, excluding shipping, handling, additional freight, and taxes. This offer can not be combined with any other offer. Other restrictions and exclusions may apply. Offer expires at 11:59pm ET on 8/23/14. Click here for full details >
detailsback to top
The MA-500TR is a Class B AIS transponder for Non-SOLAS vessels such as pleasure craft, work boats, and small vessels. Your vessels information will automatically be transmitted at fixed intervals or under base station control. The MA-500TR receives dual AIS channels (Ch. 87B and Ch. 88B) simultaneously and receives both Class A and Class B AIS information.
Transmitted information by MA-500TR AIS Transponder::
• MMSI code
• Vessel name
• Call sign
• Type of ship
• GPS antenna position
• Ship's position
• SOG (Speed over ground)
• COG (Course over ground)
• UTC date and time
• GPS antenna type
• PA (Position Accuracy)
The Plotter display looks like a marine radar display. North-up, course-up, and range zoom from 0.125 NM to 24 NM are supported. The Target list display shows all detected AIS equipped vessels and targets. The Danger list display shows a list of vessels that are within 6 NM CPA and 60 minutes TCPA from your vessel. The Danger list can be sorted by CPA or TCPA order. In addition to these display types, the Detail screen shows various information about the selected AIS target.
CPA and TCPA for collision-risk management
When a vessel comes into the CPA and TCPA range, the vessel icon blinks on the Plotter dispaly and emits a beep sound. When connected to external audio equipment installed on the deck tower, the collision alarm function will alert you even when you are away from the AIS transponder.
Individual DSC call
When connected to a compatible Icom VHF radio, it's easy to make an individual DSC call. Select a vessel using the MA-500TR's cusor keys, and then push the "DSC" button on the MA-500TR. It is not required to input an MMSI number manually.
100 Waypoints memory
Up to 100 waypoints can be stored on the waypoint list. The "MOB" button allows you to set a waypoint on your current position instantly.
When the MA-500TR receives a safetey-related message from a Class A AIS transponder, the message icon appears on the Plotter display. Up to 20 received DSC messages are automatically stored in the log memory.
3-line NMEA input/output
The MA-500TR has 15-pin D-SUB connector providing 3-lines of NMEA input/output on the rear panel. The supplied NMEA connector cable simplifies the installation and connection to the VHF radio and other navigation equipment.
GPS receiver comes with MA-500TR
The MX-5000 GPS receiver is a 12-channel parallel GPS receiver with SBAS function.
Other Features of MA-500TR AIS Transponder:
• Full dot-matrix display with adjustable backlight and contrast
• Works with Icom's M504/M604 VHF radios
• IPX7 waterproof protection (up to 1m depth of water for 30 minutes, except connections)
• Self diagnosis function
• Flush mount installation with optional MB-75
• Slow warm function