Greenwood PlyDek XL Plywood Panel, 4' x 8', each

Comments about Greenwood PlyDek XL Plywood Panel, 4' x 8', each:

This product was what I needed as in a marine treated plywood. On the other hand the quality was not what I expected for the price. Only one side is a smooth finish and it is made that way with wood putty. I have not had it on the boat long but I pray it lasts without the putty coming loose. The reason I tried this product is because of shipping costs and I could pick up localy but next time I will spend the extra money.

Comments about Greenwood PlyDek XL Plywood Panel, 4' x 8', each:

The wood was not as nice as I expected. There were gaps in the plywood and I expected at least one side of each board to be free of defects. They were useable but was disappointed in the quality.

Comments about Greenwood PlyDek XL Plywood Panel, 4' x 8', each:

These sheets of 3/4 " were straight and flat Easy to install. The joints lined up good. I coated the surface with a non skid surface like they put on truck bed liners. The surface is easy to keep clean.

Comments about Greenwood PlyDek XL Plywood Panel, 4' x 8', each:

I bought this product for a pontoon redeck. The description of this product says one smooth face. Well, all 7 sheets have voids on both sides. I could understand a few voids, but all 7 sheets have 15-20 voids on both sides as well as bad gouges from shipping. Now I must fill and smooth the wood as I am putting vinyl on top. At [$] a sheet, I would like a little better quality, but it is still $20/sheet cheaper than any other place in my area. I would recommend the product, but only with the knowledge of what you get.

Comments about Greenwood PlyDek XL Plywood Panel, 4' x 8', each:

This material is better than [@] grade. However, it is only suitable for places where the overall fit and finish is not a big issue. While it is less than 10 percent moisture (by meter), it is a C-C grade surface veneer. It is listed as "sanded face" but there are deep grain markings, up to 1/16 deep, that will need to be filled and smoothed before it can be used in a paint application, or (my application) as a substrate for vinyl flooring. There are also many knots in the faces -- while they may be "tight" they also show dimensional imperfections, such as cracking, that will require attention for any visually sensitive finish.Also note that it is not actually 3/4, it is only 23/32. This is a common difference -- but unlike most stores, this is listed as 3/4, not 23/32. Marine Plywood, which is marked 3/4, IS 3/4, and I am trying to match this to existing 3/4 marine plywood. Many places it doesn't matter -- but for some projects you want to know what you are getting.For applications such as pontoon boats with a carpeted finish, I suspect it is a perfect product. For applications where you want a smooth surface for further finishing, look elsewhere.Gander Mountain delivered my 2 sheets, well packaged, in well under a week -- can't complain about that!