details & specsback to top
Product DescriptionDockmate Complete Dock and Boat Protection System
The next time your boat comes into your slip or alongside your dock during adverse conditions, or perhaps with a less experienced hand at the helm, you'll be glad you have the advantage of Dockmate Profiles to protect your boat and dock. Prevent expensive damage to boat and dock and protect your hull against unsightly scratches and hard-to-remove scuff marks with Dockmate Profiles. Dockmate Profiles are constructed of flexible, marine-grade PVC which will not chip or crack from temperature extremes and are unaffected by oil, gas, or saltwater. UV inhibitors prevent yellowing and deterioration from sunlight to help maintain a clean, professional appearance. This heavy-duty profile has a full backing for strength and lasting endurance. Mounting screws sold separately. Typical installation requires about 4 screws per running foot, mounted 6"-8" apart at top and bottom.
The Slant "P" Profile provides a larger contact area for added protection.
• 3"H x 1-1/4"D
• Non-kinking 16' roll
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:Hello - I am interested in order 5 lengths of the Dockmate Slant P dock edge, but concerned about the comsumer review that claims it arrives rolled tight and crushed flat, is hard, unmaleable and is difficult to work with. Was this an unusual situation? Or is there a method you would recommend for working with it? Please advise. Thanks so much. KAsked on 7/16/2009 by Anonymous
A:These are rolled this way to prevent the product from "waving" and should not be to difficult to manage once it is rolled out. I recommend setting it out in the sun for a while to let it heat up. Once it is unraveled, it is pretty manageable.Answered on 7/20/2009 by Ryan from Overtons
Q:can this product be ran flat and not turn 90 degrees at the top where it is shown to over lap the top of the board.Asked on 6/29/2009 by Anonymous
A:No, you may want to look at purchasing item 71944 if you are wanting a flat mount. This is our "d" profile and is the same price for a 16ft roll.Answered on 6/30/2009 by Ryan from Overtons