ROLL ON TO ZOOM IN

VIEW LARGER

Dockmate Corner Dock Fender

Item # 73612

Customer Rating:

Key Features

Protective, inflatable fender
Permanently mounted dock bumper
Rotomolded UV-resistant marine-grade vinyl
Sturdy ribs
8" dia. x 16"H

Our Price $39.99

Buy More, Save More:
Buy 2+ at $34.99 ea.

Low Price Guarantee

Availability: Make Selections

Make Selections:

*required

Please make sure all selections are complete and a valid quantity is entered and try again.

Quantity

details

Product Description

Providing the ultimate corner protection, this innovative fender combines the protection of an inflatable fender with the convenience of a permanently mounted dock bumper. Made of rotomolded UV-resistant marine-grade vinyl with sturdy ribs for long-lasting protection. Stainless steel mounting hardware included. 8" dia. x 16"H.

product reviews

REVIEW SNAPSHOT®

by PowerReviews

Dockmate Corner Dock Fender

4.6

(based on 105 reviews)

96%

of respondents would recommend this to a friend.

Pros

Easy to use (81)
Reliable (51)
Safe (44)
Easy to install (41)
Holds boat securely (23)

Cons

Poor design (4)

Best Uses

Docks (96)
Small boats (24)
Large boats (20)
Open water (4)

- Reviewer Profile:
- Casual/ recreational (53), Advanced (39), Professional (4), Recreational (4), Beginner (3)
- Was this a gift?:
- No (66)

Most Liked Positive Review

Perfect Solution

The corner dock fender is the perfect solution for those tough-to-cover locations. Dockmate's product fit snugly on a raised platform portion of our dock where our bow was likely to scrape in windy conditions. ...Read complete review

Most Liked Negative Review

Easy Installation, Functional,

Although this product is functional and does its job, it wasn't formed exactly at a 90 degree angle so when I pulled it in tight to secure to the dock, the bottom portion flairs ...Read complete review

Although this product is functional and does its job, it wasn't formed exactly at a 90 degree angle so when I pulled it in tight to secure to the dock, the bottom portion flairs out from the dock. Inflating the unit only makes this worse. I have tied a small rope around the bottom to pull it in.

Reviewed by 105 customers

Sort by

Displaying reviews 1-5

Previous | Next »

5/17/2013

5.0

Very nice looking

By Dottie

from Nolin Lake , KY

About Me Casual/ Recreational

Pros

Easy To Install
Easy To Use
Reliable
Safe

Cons

Best Uses

Docks

Comments about Dockmate Corner Dock Fender:

Installed to protect corners of new dock. Recommend black instead of lighter color to avoid mildew stain. Looks very professional and upscale.

5/8/2013

5.0

Protects my boat

By Bob

from St. Augustine, FL

About Me Casual/ Recreational

Pros

Easy To Install

Cons

Best Uses

Docks
Large Boats

Comments about Dockmate Corner Dock Fender:

Works great to protect my boat when entering my narrow slip.

3/11/2013

5.0

Excellent, as advertised

By Teamswing

from LKG

About Me Professional

Pros

Easy To Install
Easy To Use
Reliable

Cons

Best Uses

Docks

Comments about Dockmate Corner Dock Fender:

Perfect

12/19/2012

4.0

Perfect Solution

By lakeguy

from Lake Anna, VA

About Me Casual/ Recreational

Pros

Easy To Install
Serves The Purpose

Cons

Best Uses

Docks

Comments about Dockmate Corner Dock Fender:

Easy to install. I did add stainless steel washers to make sure the screws would stay secure. Perfectly protects my boat when entering the slip.

12/17/2012

5.0

Very pleased with product.

By Jody

from Beckley, WV 25801

About Me Advanced

Pros

Easy To Install
Holds Boat Securely

Cons

Best Uses

Docks

Comments about Dockmate Corner Dock Fender:

Delivery was on time.

Displaying reviews 1-5

Previous | Next »

q & a

Do you have questions about this product? 4 easy ways to get the answers you need:

• Live Help - Real time help for basic questions. click here

• Customer Service - Use our online contact center to contact customer service and receive a response usually within 24 hours.

• Product Expert - Use our online contact center to contact our Product Experts to receive a response usually within 48 hours.

• Answer Box - Get answers from real customers by clicking "Ask a Question" below.

get answers from real customers and in-house experts with AnswerBox.

12 Questions | 16 Answers

Displaying questions 1-10Previous | Next »

Q:
can these be pump up and if so, how? the one i just got in the mail is flat
Asked on 6/28/2012 by david from anniston al
Know the answer? Answer this question
1 answer
- A:
  You pump them up the same way you would pump up a football or basketball.
  Answered on 10/15/2012 by Justin M. from Overton's
Q:
How far is it from the edge of the dock to the outside edge of the bumper?
Asked on 6/1/2011 by Anonymous
Know the answer? Answer this question
1 answer
- VERIFIED BUYER
  
  A:
  far enough to keep the boat from hitting the dock
  Answered on 6/21/2012 by none from Lakehead Ca. (on Shasta Lake)
Q:
I have a similar question as another person. I am looking for a corner peiece that I can fasten at least twice on each of the sides and not from the top. When entering my boathouse, there is a metal brace that rubs my boat as I enter the boathouse. Need to pad that with something.
Asked on 5/23/2011 by Steve from Lexington, KY
Know the answer? Answer this question
1 answer
- VERIFIED BUYER
  
  A:
  You secure these from the top and midway down the sides so that may not work.
  Answered on 7/18/2012 by Lake Girl from Lake Hopatcong, NJ
Q:
Can you mount these to a 4" square tube?
Asked on 5/3/2011 by Bumper boat from Laconia nh
Know the answer? Answer this question
1 answer
- VERIFIED BUYER
  
  A:
  What kind of tube are you talking about? A 4 inch square Tube sounds like a contradiction
  Answered on 11/6/2012 by Pete from Ebony, VA
Q:
Does this come with Hardware? If not what type of hardware is needed
Asked on 4/27/2011 by Hoosier Daddy from ATL GA
Know the answer? Answer this question
2 answers
- VERIFIED BUYER
  
  A:
  yes it came with stainless screws and has holes premolded into fender for install. all you need is a cordless drill and a couple of minutes
  Answered on 7/6/2011 by SD from Rochester, NY
- VERIFIED BUYER
  
  A:
  yes it came with stainless screws and has holes premolded into fender for install. all you need is a cordless drill and a couple of minutes
  Answered on 7/6/2011 by SD from Rochester, NY
Q:
Can this corner dock fender be mounted to a cement sea wall?
Asked on 9/16/2010 by Anonymous
Know the answer? Answer this question
2 answers
- A:
  Yes. Just keep in mind that this is durable vinyl, but vinyl, none the less. Meaning that abrassive concrete may eventually rub a hole in it.
  Answered on 9/27/2010 by Bryant from Tech
- VERIFIED BUYER
  
  A:
  I do not see why not with the proper screws.
  Answered on 6/9/2011 by Don the Admiral from Williamstown, KY
Q:
Does Dockmate make a product, similar to this, but which doesn't have the attachments on the top?
I would like to mount a bumper on a 4"x6" vertical piling, which I sometimes hit when pulling in to my boathouse.
Asked on 6/16/2010 by Jeff in FL
Know the answer? Answer this question
0 answers
Q:
In your description of the other dock fenders by Dockmate that are not for corners, you state that they must be inflated with a needle. Does this need to be inflated as well?
Asked on 4/7/2010 by Anonymous
Know the answer? Answer this question
4 answers
- A:
  The corner fender does have a needle valve for inflation. This is mainly to allow you to adjust the firmness of the bumper and doesn't necessarily mean that you have to inflate them. When the fenders are new you may need to slightly inflate them to give the fender a full shape but the heat from the sun will naturally do this in most cases.
  Answered on 4/23/2010 by Michael from Overton's
- VERIFIED BUYER
  
  A:
  They are ready to go...
  Answered on 5/21/2010 by BFFC from Lake Wallenpaupack, PA
- A:
  Doesn't have to be but they are pretty soft when they come from the factory. I bought a $3 basketball pump for wally world so that I could control the pressure.
  Answered on 6/1/2010 by Randy from Kerens, TX
- VERIFIED BUYER
  
  A:
  Yes, there is a needle fill at the bottom of the fender. It must be filled after installation or the shape becomes malformed and will not mount flat to the dock.
  Answered on 5/4/2010 by Capt Bill from Chicago, IL
Q:
Can this be mounted by the sides since I plan to mount it on a tall vertical dock storage shed corner at the outside corner of my dock?
Asked on 1/30/2010 by John from Columbus, OH
Know the answer? Answer this question
1 answer
- VERIFIED BUYER
  
  A:
  THE TOP IS ENCLOSED FOR FASTENING PURPOSES SO IT NEEDS TO FIT OVER THE TOP OF A CORNER POST OR DOCK LIKE YOU SEE IN THE PICTURE. IF YOU CUT THE TOP OFF THERE IN ONLY TWO HOLES LEFT TO FASTEN AND YOU WILL PROBABLY CUT INTO THE AIR CHAMBER.
  GOOD LUCK
  Answered on 3/8/2010 by KW from MORRIS, CT
Q:
1)What are the linear dimensions (length and width) of the flanges that lay on the top of the dock?
2)What is the distance between the top (outer)edge of the dock and the center-line of the top mounting holes?
3)What is the distance to the between the top edge of the dock and the center-line of the vertical mounting holes?
4)What does the included stainless steel hardware consist of?
Asked on 7/14/2009 by bytecourier from Adirondack,NY
Know the answer? Answer this question
1 answer
- VERIFIED BUYER
  
  A:
  1. 2" x 6"
  2. 1 1/4
  3. 7"
  4. 6 stainless screws, hex head, 1" long
  Answered on 4/26/2010 by Logan Martin River Rat from Pell City, Alabama