details & specsback to top
Product DescriptionThese simple-to-install Caliber Marine Trailer Slides reduce loading and unloading effort. They are unaffected by sun, weather, and seawater. Trailer slides come in 10-pad packs and include stainless steel attaching hardware.
videosback to top
manualsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:I paint the bottom of my boat will it take off the paint?Asked on 5/29/2014 by Billy from Ny
No. It should not affect the paint on the bottom of your boat. It is less abrasive than most bunk carpet.
SteveAnswered on 5/30/2014 by Anonymous
Q:CAn these be used on a boat lift?Asked on 4/2/2014 by kandersn
A:Provided the 1 1/2" x 15" dims accommodate your application, you should be fine.Answered on 4/3/2014 by Anonymous
Q:i have a 20 ft bass boat and am worrid about scratching or the weight of the boat sitting on these strips for a period of time
fiberglass boat - will they void any warrantyAsked on 7/30/2012 by morris from jackson mo. 63755
A:they will neither scratch nor mar the boat and they will should not void any warranty.Answered on 11/7/2012 by Justin M. from Overton's
Q:Okay for painted aluminum hulls? Some plastic slides are not recommended for painted aluminum boats - Are these ok to use on painted boats?Asked on 6/16/2012 by Anonymous
Q:Can you use these guides with riveted jon boatAsked on 5/10/2012 by Anonymous from NC
Q:Are you sure the dimensions are correct? 15" L?Asked on 9/27/2010 by Anonymous from Glendora, CA
A:Yes, the are 10 of them in a pack and each slide is 1.5 inches wide and 15 inches long.Answered on 9/28/2010 by Bryant from Tech
Q:How heavey of a fiberglass boat will these take?
23 ft. about 4400 lbs. work ?Asked on 9/27/2010 by Bob from Mn.
A:Well, weight is really not a factor because these screw down to your existing bunk boards.Answered on 9/28/2010 by Bryant from Tech
Q:Will these mark or damage the gel coat when loading the boat?Asked on 9/27/2010 by Anonymous
A:No, the places where you secure them with self tapping screws are counter sunk. This will not scratch your boat.Answered on 9/28/2010 by Bryant from Tech
Q:Would you recommend the 1.5"w or 3"w for loading a jet ski?Asked on 2/4/2010 by back seat driver from east coast
A:The wider these are the easier it is to load and unload, but you could use either size for pwc.Answered on 2/9/2010 by Justin from Overton's
Q:What are the actual dimensions of the pads? 10 to a package?Asked on 7/27/2009 by Jeff from Jersey Shore
A:The pads are 15" in length and 1.5" in width. They come 10 to a package.Answered on 9/10/2009 by Jordan from Overton's