You May Also Like
back to top
Megaware SkegGuard
$104.99
Megaware SkegGuard
$104.99
details
back to topvideos
back to topproduct reviews
back to topREVIEW SNAPSHOT®
by PowerReviewsPros
- Good performance (30)
- Reliable (15)
- Weather proof (13)
- Easy to use (7)
- Easy to install (6)
Cons
Best Uses
- Small boats (24)
- Large boats (14)
- Personal crafts (14)
- Personal watercraft (5)
- Waterskiing (5)
- Reviewer Profile:
- Advanced (22), Casual/ recreational (19), Recreational (11)
- Was this a gift?:
- No (30)
Most Liked Positive Review
Blackfin Skeg is an awesome deal !!
easy install, awesome deal !!!!
easy install, awesome deal !!!!
VS
Most Liked Negative Review
LOOSE FIT ON ALPHA ONE (GEN ONE)
I HAVEN'T INSTALLED YET, AS 'DRY FIT' SEEMS QUITE LOOSE & I'M CONCERNED ONCE I GLUE IT UO, IT MAY BE DIFFICULT TO MAINTAIN PROPER CENTER LINE POSITIONING. I FEEL THE BLACKFIN ...Read complete review
I HAVEN'T INSTALLED YET, AS 'DRY FIT' SEEMS QUITE LOOSE & I'M CONCERNED ONCE I GLUE IT UO, IT MAY BE DIFFICULT TO MAINTAIN PROPER CENTER LINE POSITIONING. I FEEL THE BLACKFIN SKEG COVER SHOULD BE A MORE SNUG FIT EVEN WHEN DRY FITTING TO MAINTAIN ACCURATE CENTERLINE POSITIONING. I AM CONSIDERING RETURNINNG THIS PRODUCT FOR A STAINLESS ONE WITH MOUNTING SCREWSS TO MAINTAIN A HIGHER DEGREE OF CENTERLINE ACCURACY.
Reviewed by 57 customers
Sort by
Displaying reviews 1-5
Previous | Next »
Pros
- Good Performance
- Reliable
- Tough
- Weather Resistant
Cons
Best Uses
- Large Boats
- Small Boats
Comments about Blackfin Skeg:
The Blackfin Skeg protector is an outstanding product; I've had one on every boat I've owned because if installed correctly this one small item can and will save U a lot of money.
I hit a submerged floater on the lake a couple of months back and the entire skeg was broken off my lower unit BUT the Blackfin was still intact!!!! if that wasn't enough to convince me I was told by a person with an insurance company that without having had the Blackfin installed I would/could have totalled the motor!! Love my Blackfin and will have one on any boat I own from now on.
- Was this a gift?:
- No
Pros
Cons
Best Uses
- Small Boats
Comments about Blackfin Skeg:
I installed the Blackfin in less than a half an hour. I had torn off more than 3 inches of my skeg and had to use the entire tube of sealant to fill the bottom of the repair skeg. Our season is over for boating but I am anxiously awaiting trying out this great looking product!
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about Blackfin Skeg:
It was easy to install. I keep my boat in fresh water during the season and I was checking it and it was peeling off. I now have to replace it with a SS version.
- Was this a gift?:
- No
Pros
- Good Performance
- Install clear of prop
- No screws or drill holes
- Restores skeg perfectly
- Weather Resistant
Cons
Best Uses
- Just measure skeg
- Large Boats
- Personal Crafts
- Small Boats
Comments about Blackfin Skeg:
Other products need to be screwed on the broken skeg. I feel this would be too ridgid, and if hit bottom again might break skeg off too high.
This product comes with great adhesive,and is strong rubber that will give. At worst it can be removed and replaced, and will not break off skeg. I love it! A perfect repair for my broken skeg.
- Was this a gift?:
- No
Comments about Blackfin Skeg:
easy to install, no trimming needed
Displaying reviews 1-5
Previous | Next »
q & a
back to topDo you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:
I have a 2007 90HP mercury outboard two stroke, what size will best fit this ? Thanks.Asked on 7/15/2012 by rowdy from terre haute , in.0 answers
Q:
I have a King Cobra outdrive. The measurement is 14.5".....I've heard these will work on my outdrive and then I've heard they won't work on a King Cobra outdrive. Does anyone have a definite answer?Asked on 7/5/2012 by Rob from Farmington, MN0 answers
Q:
i have an 150 hp Yamaha with dual props lower unit measurres 17" does a large fit it r is their an extra largeAsked on 6/29/2012 by mojoronnie0 answers
Q:
Is this item good for repair also? If so, how much of the old skeg, (in my case it was broken off), does there have to be to attach the black fin?Asked on 5/29/2012 by Anonymous0 answers
Q:
I HAVE A 2011 MERCRUISER MULTIPORT FUEL INJECTED V6, WHICH SIZE OF BLACKFIN SKEG DO I NEED.Asked on 2/23/2012 by Anonymous0 answers
Q:
When measuring for my blackfin i get between 12.5 and 13.5, which size should i order, a small or medium?Asked on 8/27/2011 by E2bhunting from Baltimore, MD1 answer
A:
The medium. Small is for 10.5" to 11.5"
Medium fits 12.5" to 14.5"Answered on 7/29/2012 by Brian from Phoenix, AZ
Q:
what size for a new 75 hp four stroke yamahaAsked on 8/21/2011 by Anonymous0 answers
Q:
Hi, I have a johnson 115 HP 2 stroke from 1999. What size should I use?
Thanks for your answer
PhilAsked on 8/17/2011 by Phil from France0 answers
Q:
on my johnson 115 the mesurment that i got was 15 inches. is this the large sizeAsked on 8/16/2011 by Anonymous0 answers
Q:
I have a 1999 mercury 135 HP optimax. I measured the bullet of the lower unit measures 13" what size will fit best?
v/r
KenAsked on 8/11/2011 by Ken Phelps from Columbus, MS0 answers


