detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:i have a 2005 23ft nautic star. cani use this fuel gauge. do you have any with a gold rim or can i use mineAsked on 6/1/2011 by tom from ocean city,md
Q:We have a crestliner boat and need to install the Faria fuel gauge. do you have wiring instructions?Asked on 5/3/2010 by Moo Girl from Rensselaer, IN
A:Connect ground to terminal marked "G". Locate the hot wire (12v) with voltmeter, it is usually a color other than red. The voltage between the ground wire, usually the black wire and the colored wire should be your system voltage when the ignition key is on. The terminal on the gauge for the hot wire will be marked "I" for ignition. The senser wire is usually red, connect it to the third terminal. Caution: DO NOT CONNECT THE HOT WIRE TO THE SENSER TERMINAL, IT COULD DAMAGE THE FUEL SENSER IN THE FUEL TANK.Answered on 11/16/2011 by LJ from Greenville, Kentucky
Q:I am assuming that this is a 6 volt fuel gauge. I need to find out what does it read? I need it to read 0 ohms-empty and 30 ohms-full.
Please, let me know. Thanks.Asked on 9/11/2009 by John from Plano, TX
A:These gauges, as well as our other gauges. are designed to read full at 33ohms, and empty will typically read 240 ohms, as most senders send signals from 33-240 ohms.Answered on 9/14/2009 by Bob from Overton's Tech
A:I know that this gauge will provide a reading at those ohm ranges, but if you would like specific information or any information similar to this customer please call our technical department, so that we can work with you directly to make sure the products we provide will work with your application. The technical department can be reached at toll free 1-888-683-7866Answered on 9/21/2009 by JUSTIN from OVERTONS TECHNICIAN
Q:I have a 1996 Crownline 202 W/Faria guages fuel is erratic is there a test to know if its sender or guage?Asked on 7/25/2009 by DG from Clear Lake Ia
A:Most standard marine fuel senders come in two flavors, American and European. The American senders have a resistance range of 240 to 33 ohms (240 ohms empty, 33 ohms full). The European senders are 10 to 180 ohms (10 ohms empty, 180 ohms full).
It is possible your gauge has not moved because the fuel sender has not moved. This can occur if the fuel sender is poorly aligned and "maxes out" mechanically before the tank is full. Another possibility is that there is a short in the sender wires.
To test your gauge, remove the sender wire. The gauge will read full or empty. Then short the sender terminal of the gauge to ground, it should read the reverse.Answered on 11/12/2009 by OVERTON'S from TECHNICIAN
Q:I have a 1997 Searay with Teleflex gauges.... one fuel gauge face plate came off. If I replace with a pair of the Faria gauges will this work?Asked on 5/12/2009 by Sloupy from Boca Raton, FL
A:You need to match the sending unit with the gauge. It may work, but chances are it will not.Answered on 6/16/2009 by DB from Galveston, TX