You May Also Likeback to top
detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:What is the mounting hole pattern? b.h.c. or distance between holes center to center or is that a standard pattern? looks like my old sending unit has an (one hole off set) hole pattern. My tank is an AFP Model No. 122-18A-AF.Asked on 8/7/2011 by Anonymous
A:Standard 5 hole starAnswered on 7/6/2012 by Boardflipper from Michigan
Q:WILL THIS UNIT REPLACE A MEDALLION INSTRUMENTS INC B-1321Asked on 6/7/2011 by T FRED from LEXINGTON NC
Q:Does this come with the gasket and everything you need for installation?Asked on 5/25/2011 by JC
A:YesAnswered on 7/16/2012 by B from CA
Q:Does it work with diesel?Asked on 5/24/2011 by Marco from RIo de Janeiro, Brazil
Q:I have sending unit like universal one in pic. 5 screws on top hold it down on top of tank. 2 wires on top of unit, one in center and the other i don't know if it attaches to one of the mounting screws or if it matters which one. There is another 2 more smaller screws one seems to be broken off maybe thats is where I am getting water in the tank. Where do I attach the second wire on my sending unit?
Thanks for your time
BillAsked on 4/30/2011 by 22 pathfinder-Bill from Sarasota fl
Q:What is the return policy on this product?Asked on 4/4/2011 by Capt Zydeco from Fairfield, California
Q:Does it come with a new gasket ?Asked on 7/11/2010 by Anonymous from Cinn,OH
A:both of mine didAnswered on 8/20/2011 by surfer from Saratoga Springs NY
Q:Calibrated for 33-240 ohms .How do i find the ohms.Asked on 5/13/2010 by Anonymous
A:Using an ohm meter, connect your test leads to the two posts on top of the sending unit. The display on your meter should vary between 33 - 240 ohms as you raise and lower the float.Answered on 6/22/2010 by Geuse from Horatio, SC
Q:Will it work with Faria fuel gauge?Asked on 1/23/2010 by Anonymous
A:yes it does. I have a faria fuel gauge on my pontoon boat and works well.Answered on 5/14/2010 by BillA from Shelby, Alabama
I am installing this as a new installation on a kawasaki teryx utv with a plastic fuel tank. Is there a wiring diagrahm with the gauge or the sender? Or is it just a simple 12v to gauge and from gauge to sender and ground sender to frame?Asked on 8/24/2009 by Ron from Troutville Va
A:It goes just as you said, 12v to gauge and a ground from the unit to the frame in your case. The lenth of the float is ajustable to fit the tank perfectlyAnswered on 8/27/2009 by Larry Hammond from 842 north ave. Burlington v.t.