detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:how far will i pt of each coverAsked on 7/23/2012 by Joshua from United States
A:1 quart of primer will cover about 60 square feet. There are 2 pints in a quart so about 30 square feet is the coverage area of 1 pint of primer.Answered on 11/6/2012 by Justin M. from Overton's
Q:My boat has several coats of white marine paint that have
been applied over the years with sand or walnot shell as
non skid. I realize I must scrape the loose stuff off....is
that sufficient prep before applying the primer?....or since
I am applying over paint do I need the primer?Asked on 7/2/2012 by dave from indianola, wa
Q:I have bought the tuff coat primer & hardner. No instructions were sent with the products. Do I need to mix the 2 products together or use them seperatly? If using sepertly, does the primer have to be applied first & then apply the hardner?Asked on 8/31/2011 by gabe6fish from Greenwood, DE
Q:There are no mixing instructions for the primer. What do I do with the CP-10 Primer and the CP-10 Hardener?Asked on 5/21/2011 by Anonymous from Southlake, TX
A:you have to mix the two parts. they are binary liquids that become active once mixed. make sure you stir them for several minutes to ensure proper mixingAnswered on 3/28/2012 by DJ from Butler, Pa
Q:Can I use this primer on some new plywood I installed on the floor of the boat. I am going to install new carpet after I prime wood.Asked on 4/15/2010 by speedy
A:I just did 8 sheets of new marine grade plywood for the deck on my pontoon boat and it worked great. After drying the surface was somewhat rough which helps the paint adhere to it. I would think this would be great for carpet glue also.Answered on 6/3/2010 by Sherm from Henderson, Nv.
Q:do you recieve 1 quart of each when you order ?Asked on 1/31/2010 by Anonymous
A:This does come with one quart of each.Answered on 2/5/2010 by Jordan from Tech
Q:I'm confused about the primer and rubberized nonskid marine coating. I'm applying this to a pontoon boat with wood flooring. My question is which product goes on first? I put one coat of the nonskid coating on already, If this is not right what do I do. Thanks
Charles W. LowreyAsked on 11/9/2009 by Anonymous from Crestview, FL.
A:The primer goes on first, then the non skid coating is applied. Please contact our technical department at 800.334.6541 for further information.Answered on 11/11/2009 by Jordan from Overton's
Q:what is the coverage of 1 gal. of this product?Asked on 10/30/2009 by Anonymous from Yoncalla, Oregon
A:It would cover roughly 250 sq. ft.Answered on 11/3/2009 by toby from overtons tech. dept.
Q:Is the primer in different colors?Asked on 6/26/2009 by Lola from Tacoma, WA
A:We do not offer different colors.Answered on 6/26/2009 by Matt from Overtons
Q:the info on this product implies one quart of a and one quart of b . is this a total of 1 or 2 quarts?Asked on 6/15/2009 by elasto man from brentwood calif.
A:It is one quart of each.Answered on 1/15/2010 by Bryant from Tech