detailsback to top
Product DescriptionThe ideal coating for every boat and dock, Overton's Rubberized Nonskid Coating is the world's BEST nonskid coating. Made of a cross-linked acrylic urethane co-polymer that's extremely weather, wear, and impact-resistant. The wide variety of applications range from boat docks and ramps to boat and pontoon decks, galleys, and fly bridges. Designed to adhere to wood, concrete, metal, fiberglass, plastic, rubber, vinyl, and much more. Water based, nontoxic, and environmentally friendly. Nonabrasive. UV-resistant colorfast pigments. Nonflammable. Resistant to acids, solvents, fuels, chlorine, salts, etc. Great for the do-it-yourselfer, Tuff Coat Nonskid Coating must be applied using the Tuff Coat Roller (item #73215 sold separately). It is recommended that this coating be applied at a maximum of 40 to 50 sq. ft. per gallon for most non-heavy commercial applications. Shipped ground only. No return or refund if product has been opened.
Approximately one quart of primer is required for every gallon of Overton's Rubberized Nonskid Coating.
Tuff Coat Nonskid Coating FAQs
Q: My existing flooring is dirty and damaged. Can I apply Tuff Coat directly over the old flooring, or will I have to remove the old flooring?
A: If your flooring is dirty or damaged, it's recommended that you remove it and thoroughly clean the area to ensure proper adhesion.
Q: What is the expected coverage?
A: One quart of primer and one gallon of Tuff Coat (applied in two coats) should cover a maximum of 40-50 sq. ft. for most non-heavy commercial applications.
Q: Do I have to use the Tuff Coat Application Roller for both the primer and the Tuff Coat Nonskid Coating?
A: No, you can brush or roll on the primer with a regular paint brush or roller. The Tuff Coat Roller (item #73215) is only required when applying the Tuff Coat Nonskid Coating.
Q: What should I use to clean the area prior to application?
A: Use a commercial-quality degreaser or laundry detergent with a scrub brush. Make sure all grease, oil, and other contaminants are removed from the area where Tuff Coat will be applied.
Q: Can I apply Tuff Coat with a sprayer? Can I use my HVLP (High-Volume Low-Pressure) gun to apply Tuff Coat?
A: Only use the spray gun recommended by Tuff Coat – Superior Brand Spraying-Mantis Handheld Hopper Gun. For larger projects, Tuff Coat recommends Graco Brand Tex-Spray Compact.
Q: Can I apply Tuff Coat to a painted surface?
A: Yes, if the surface is not cracked or chipped and is structurally sound. To apply Tuff Coat to a painted surface, aggressively roughen the surface by sanding it with 36 or 40 grit sandpaper. The surface must be rough for proper adhesion. Clean all oils, grease, dirt, silicone, and other contaminants. Leave no residue. Prime with Epoxy Primer CP-10 (item #73216), then test a small area for adhesion. If adhesion is acceptable, then apply the Tuff Coat.
Q: Can I apply Tuff Coat to a steel or aluminum surface?
A: Yes. All smooth metal surfaces should be cleaned and aggressively roughened by sanding with 36 or 40 grit sandpaper or by acid etching. Acid etching is recommended by the manufacturer. After roughening, clean and dry the metal surface, then prime with Metal Primer MP-10 (item #73217). Test a small area for adhesion before applying Tuff Coat. If adhesion is acceptable, then apply the Tuff Coat to the area.
Q: Can I apply Tuff Coat to plywood or treated lumber?
A: Yes. New lumber needs no sanding, however old lumber should be sanded with 36 or 40 grit sandpaper. Make sure the surface is clean and completely dry. If applying to pressure-treated wood, be sure the wood has had sufficient drying before applying the primer or Tuff Coat. Prime the surface with Epoxy Primer CP-10 (item #73216). Test a small area for adhesion before applying Tuff Coat. If adhesion is acceptable, then apply the Tuff Coat to the area.
Q: I previously applied Tuff Coat to my boat and now need to repair an area. Can I apply Tuff Coat over existing product?
A: Yes. If Tuff Coat ever becomes damaged, it can easily be repaired or coated over since the product bonds to itself. To repair, use a utility knife to remove all the damaged Tuff Coat. Then with the knife, make clean, sharp lines to establish a well-defined area for re-coating and eliminate any uneven edges. Sand the area with 36 or 40 grit sandpaper, so the new application can adhere well. Clean and dry the area, then prime with Epoxy Primer CP-10 (item #73216), before re-applying Tuff Coat.
Q: Are there any special requirements for maintaining the Tuff Coat finish?
A: When cleaning Tuff Coat, do no use bleach or other caustic materials. For best results, clean Tuff Coat with a stiff deck brush and a general, all-purpose cleaner, such as Simple Green, TSP, laundry detergent, etc.