detailsback to top
q & aback to top
Do you have questions about this product? 4 easy ways to get the answers you need:
get answers from real customers and in-house experts with AnswerBox.
Q:whats the distance from center to center of the mounting screw holes?Asked on 5/14/2014 by Jack
A:2.5" center to centerAnswered on 5/16/2014 by Product Expert from Overtons
Q:What is the size of the opening for the slat? Is there a angle to the mounting surface, for the opening to have some degree of pointing upward?Asked on 9/27/2009 by Anonymous
A:The opening size is not available. The wood bows and fiberglass bows are 6 or 8 foot long, so if your boat is just a little bit less than 6 or 8 foot the bow will bend up itself to fit into the slat. The width of the boat determines if this will work for you and how much it will bend the bow. The fiberglass bows will need to be sanded down on the ends just a little bit to fit into the slat sockets. There is no angle in the slat sockets or anything like that.Answered on 10/7/2009 by Overton's from Technician
A:1 3/4in height & 1/2inch in width are the dimensions of the opening. Sorry about the previous messageAnswered on 8/12/2011 by Justin from Overton's
A:I believe 1 and 3/8 inches wide or so. Buy the wooden slat at Home Depot [ in hardwood moulding section $1.19/ft. ] Buy hardwood as they are also there in pine. These slats are the right width and always in stock. Yes, there is a slight upward angle to the socket to accept the arched approach angle of the slat. Never had one break; didn't know they could break under normal use. I also use the plastic rail clip type for the bowrider area cover support. Fasten them to slat to prevent rolling around railing and loss when removing slat to uncover boat when in the water.Answered on 7/31/2012 by Unkydave from N.H.